Distribuidor Exclusivo |

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

QUEM SOMOS | PRODUTOS | FORMAÇÂO | CASE STUDIES | EVENTOS | CONTACTOS
 
PÁGINA PRINCIPAL > PRODUTOS > KIT
 
 
New Hanaro KIT   GS KIT   Simple KIT
HKA
• Upper Case: Semi-transparent design facilitates internal observation
• Middle Case (upper structure): Color line and color rubber enable the easy selection of tools for fixture grafting
• Middle Case (lower structure): Enables connection to the bottom box; comes with a handle to facilitate movement
• Lower Case: Comes with a steel box for storing the tools used for surgery
OGSK2
• GSII Fixture Surgical KIT
• Has all the tools needed for the GS system procedure
• Drill with a stopper helping a beginner perform surgery conveniently
• The color line is designed for the different diameters of GS fixtures and bone conditions, thereby facilitating the selection of the desired tool for surgery
• The new Sidecut drill and NoMount driver make implant treatment easy
• Heat- and shock-resistant engineering plastic material
OSPK
• Affordable expert surgical KIT
• Tools designed for the grafting of all Osstem implant fixtures
• 15mm no stopper drill
MS KIT   Sinus KIT   Ortho KIT
OMSK
• Denture Implant
• Narrow Ridge Implant
• Temporary Implant
• Drills (5 types)
• Drivers (4 types)
• Gauge (3 types)
ASLK
• Compact design
• Various types of tools (5) used for the sinus procedure
• 5 components
  Freer Elevator: OFE
  Bone Graft Carrier: OBGC
  Membrane Separator (Circle type): OMSC
  Sinus Curette: Short - OSCS
  Sinus Curette: Long - OSCL
OOKS
• Orthodontic Treatment KIT
• Comes with a disinfectable tray for storing orthodontic screws
• Drills (2 types)
  1. ø 1.3 Drill
  2. ø 1.5 Drill
• Drivers (4 types)
  1. Driver Tip (Hex Type)
  2. Driver Hp (Cross Type)
  3. Machine Driver (Hex Type)
  4. Hand Driver (Hex Type)
• Handles (2 types)
  1. Universal Handle
  2. Driver Handle
Prosthetic KIT   Osteo KIT – OSTK   Osteo KIT – AOST
OPK
• Separated design of the driver tip and handle enables use as a hand driver and a torque wrench
• Torque wrenches (10, IS, 20,25,30 Ncm) Guaranteed precision of screw tightening

OSTK
• Concave Osteotome: Use for maxillary sinus elevation for the vertical expansion of the volume of alveolar bone available In the maxillary posterior
• Expanding Osteotome: Without cutting low-quality bone, the preservation of the bone densities the bone trabecular enhance the initial boncfing of implants
• Stopper for the adjustment of surgical depth
• Components
  2.0, 2.5,3.0, 3.5, 4.0 Concave Osteotome
  2.0, 2.5,3.0, 3.5, 4.0 Expanding Osteotome
  New Mallet
  Osteotome: OST20CA. OST25CA. 05T30CA.   0ST3SCA. 05T40CA
  OST20EA, OST2SEA, OSUOEA, OST3SEA.   OST40EA
  New Mate : OSTMP
  New Osteotome sec OSTK

AOST
• Use for maxillary sinus elevation for the vertical expansion of the volume of alveolar bone available in the maxillary posterior
• Includes only the concave type
• Components
  2.5,3.0, 3.5, 4.0 Osteotome, Malet
  Osteotome: OST2S, O5T30, OST35, OST40
  Osteotome Mallet : OSTM
  Osteotome sec: AOST
Ridge Split KIT – straight/offset   Ultra KIT   Bone Spreader KIT

• Chisel: Use for alvelar bone expansion
• Blade Holder: enables mallettlng for soft bone
• Straight type (ORSSK)
• Offset type (ORSOK)

ORSSK (1)
• Components
  Ridge Spit Chisel: ORSS15, ORSS20,   ORSS25, ORSS30
  Blade Holder: ORSBH

ORSOK (2)
• Components
  Ridge Split Chisel: ORSS15,0RS020,   ORS025.0RS030

• Ultra-Wide fixture surgical KIT
• KIT Components
  Drills (4 types)
  - ø 4.6 Three Cutter Twist Drill
  - ø S.5 Direct Drill -0 6.5 Direct Drill
  - ø 2.0 SideCut Drill
  Surgical taps (2 types)
  - ø 6.0 Surgical Tap
  - ø 7.0 Surgical Tap
  Trephine drills (2 types)
  - ø 4.2/ 0 5.0Trephine Drill
  - ø 5.2/ 06.0Trephine
   Drill Trial pins (2 type)
  - ø 5.5 Trial Pin
  - ø 6.5 Trial Pin
  Etc (3 types)
  - Simple Mount Driver
  - 1.2 Hex Hand Driver
  - Open Wrench

OBSOK
• Use for alvelar bone expansion
• Offset type for easy operation
• Components
  QBS022F, 0BS028F, 06S035F, 0BS035R

Custom KIT

  CAS-KIT   Taper Kit
OCTK
• When only part in the surgical operation organization steritzation, uses.
• Composition of additional rubber (small, middle, large)
• Use for autoclave
• Safely lifts the sinus membrane while drilling
• Unique Stopper system that prevents over drilling into the sinus cavity
• Hydraulic Lift System that easily & safely lifts the membrane
• Bone Carrier System for transferring and filling bone material
• Bone Spreading System for spreading & compacting bone material
• Simple and intuitive surgical system
• The ability to combine Osteotome in surgery
• CAS-KIT Catalogue [Download PDF]
OTSK
• GS III & NEW SS III Fixture Surgical Tool
• The KIT consists of Taper Drill similar to Fixture shape
• The line enables the easy surgery for fixture with bone condition
• The new Sidecut drill and NoMount driver make implant treatment easy
• Stopper of Straight drill consists of short stopper
 
© Biofisa | Rua Cidade de Bissau, 47E – Esc. 33.5 | 1800-075 Lisboa | +351 211 550 829 | geral@biofisa.com
Política de Privacidade